ELAC Varro Dual Reference DS1200 Bedienungsanleitung Seite 7

APP „SUB CONTROL 3.0"
Your ELAC subwoofer incorporates an advanced, digital control system. Analog
rotary potentiometers and switches have been replaced by a digital signal pro-
cessor (DSP), which allows you to adjust your subwoofer conveniently and ac-
curately.
All parameters, such as volume, low pass frequency, phase etc., as well as the
automatic calibration function, can be conveniently adjusted with the help of the
free APP. The digital control system also eliminates the possibility of unwanted
changes to controls and settings.
Note: The APP used to control the subwoofer does not require any complicated
connections to your home broadband (WLAN) network. The control system op-
erates using Bluetooth® Low Energy (BLE).
Please go to the relevant source and download the "SUB CONTROL 3.0" APP
required to control the subwoofer. For Apple® iPhone® and iPad® users, this is
the Apple® App Store®. Android® users should visit the Google® Play Store®.
Enter "ELAC" or "SUB CONTROL 3.0" as a search term and look for the icon
shown below.
Please note that your mobile device must support Bluetooth® Standard 4.0. This
is the case for the majority of devices sold as of mid-2013. If necessary, check the
accompanying documentation for your mobile device or contact the manufac-
turer's support hotline.
Note: In case your mobile device needs a 4 digit code during the subwoofer pair-
ing procedure, please enter four times zero („0000").