SystemAir AW EC Betriebsanleitung Seite 27

Operating Instructions AW EC
Connection data of terminals
Terminal
Stripping length
Conductorcross-section rigid min.
Conductor cross-section rigid max.
Conductor cross-section flexible min.
Conductor cross-section flexible max.
Conductor cross section flexible with wire end
ferrule without plastic sleeve min.
Conductor cross section flexible with wire end
ferrule without plastic sleeve max.
Conductor cross section flexible with wire end
ferrule with plastic sleeve min.
Conductor cross section flexible with wire end
ferrule with plastic sleeve max.
Conductor cross-section AWG/kcmil min.
Conductor cross-section AWG/kcmil max.
The data refer to the connection possibilities of the terminals. The necessary conductor cross section must be dimensioned
according to the respective prevailing conditions.
Push-In Terminals
Permissible tightening torques M
Cable glands
Cover for terminal compartment *
* Recommended tightening speed maximum 400 min
L-BAL-F101-GB 2023/26 Index 001
Line, relay
10 mm
2
0.2 mm
2
4 mm
2
0.2 mm
2
2.5 mm
2
0.25 mm (stripping length 8 mm)
2
2.5 mm (stripping length 8 mm)
2
0.25 mm (stripping length 8 mm)
2
1.5 mm (stripping length 8 mm)
24
12
Rigid conductors and conductors with wire end ferrules can be plugged directly into
the terminal without tools.
A
Thread size Tightening torque M
[Nm]
M16x1.5 2.5
4.0 2.5
-1
Part.-No. 00712749-GB
9/18
modulation
10 mm
2
0.2 mm
2
1.5 mm
2
0.2 mm
2
1.5 mm
2
0.25 mm (stripping length 8 mm)
2
1.5 mm (stripping length 8 mm)
2
0.25 mm (stripping length 8 mm)
2
0.75 mm (stripping length 8 mm)
24
16
Remarks
A
[Lb In]
22 Sealing area for cable diameter 4...10 mm
22
Electrical installation