Interlock lid
Place the lid on so that the
marker on the water
container indicates the
lock opened.
Using the device
1. Fill cold, clean tap water into the water container. Observe the
MAX marking.
2. Place the lid on the water container and lock it.
3. Plug the connector into the socket.
4. Switch on the main switch (I), an acoustic signal sounds and the
temperature displays flash from below to above.
5. With switching on the device, the last temperature setting is
selected automatically (memory function). As appropriate, use the
rotating switch to set another water temperature. With every turn
of the temperature rotating knob, an acoustic signal sounds and
the selected temperature display lights up. The device will start to
heat up.
6. Fill the tea into the tea sieve or add the teabag to the teapot.
Rotate the lid counter-
clockwise until the marker
points to the closed lock.
The lid is now locked.
25