FeinTech AX210 Bedienungsanleitung Seite 9

Notes:
7.1 audio formats such as Dolby TrueHD or DTS-HD as well as the 5.1 audio format DTS are not
processed by some TVs. If the EDID setting nevertheless forces the output, such a TV will remain
mute.
When changing the EDID switch, note that it may be necessary to restart the connected player. If
you do not achieve the desired output or display, please proceed as follows:
• Switch on the desired EDID mode.
• Disconnect all units from the mains for a few seconds.
• Then plug in the mains plugs and switch on the devices. Do this in the following order: TV /
projector / AV receiver, HDMI audio extractor, HDMI source
Connections, Displays & controls
1. HDMI IN input for connecting the external player
2. HDMI OUT connector, for connecting the TV, monitor or video projector
3. OPTICAL digital audio output (SPDIF Toslink)
4. L/R analogue audio output, stereo, for 3.5 mm jack
5. DC 5V, connection for 5 V power supply.
6. Power LED, lights when the device is powered
7. IN LED, lights up when the active source is connected
8. OUT LED, the LED lights up when a signal is output to connected display
9. ARC LED, lights up when ARC is active and the sound from the TV is extracted to the OPTICAL
output. The ARC LED flashes if an error in CEC communication occurs and there is no output.
9