Keep Your Dishwasher In Shape - Ariston LI 420 Gebrauchsanleitung

Cleaning and special maintenance
The filter assembly
If you want consistent good
results from your
dishwasher, you need to
clean the filter assembly.
The food particles are
removed from the wash
water, allowing it to be
recirculated during the
cycle, filtered perfectly. For
this reason, it is a good idea
to remove the larger food
particles trapped inside the
cup "C" and the semi-
circular filter A after each
wash; pull the cup handle
upwards to remove them.
Just rinse them under
running water.
The entire filter assembly
should be cleaned
thoroughly once a month:
cup C + semi-circular filter

Keep your dishwasher in shape

Respecting these
have a reliable work companion by your side.
After every wash.
When the wash cycle has ended,
always remember to turn off the
water supply tap and to leave the
appliance door ajar. This way,
moisture and bad odours will not
be trapped inside.
Unplug the appliance.
Before carrying out any cleaning
or maintenance on the dishwasher,
always remove the plug from the
electricity socket. Do not run risks.
No solvents! No abrasives!
To clean the exterior and rubber
parts of your appliance, do not use
solvents or abrasive cleaning
products. Use a cloth dampened
with lukewarm soapy water only.
If there are any stains on the
surface of the appliance interior,
use a cloth dampened with water
and a little white vinegar, or a
cleaning product specifically made
for dishwashers.
Care and maintenance
A + cylindrical filter B. Ro-
tate filter "B" anticlockwise
to remove it.
For cleaning, use a non
metallic brush.
Reassemble the filter parts
(as shown in the figure) and
reinsert the whole assembly
into the dishwasher.
Position it into its housing
and press downwards.
The dishwasher is not to be
used without
Improper replacement of the
filters may reduce the
efficiency of the wash and
even damage
dishwasher.
few rules ensures
Going on holiday?
When you go away for an extended
period of time, we recommend you
do the following:
• run a cycle with the dishwasher
empty
• turn off the water inlet tap.
• leave the appliance door ajar
This will help the seals last longer
and prevent unpleasant odours
from forming inside the appliance.
Moving the appliance.
Should the appliance have to be
moved, try to keep it in a vertical
position. If absolutely necessary, it
can be positioned on its back.
The seals.
One of the factors that cause
unpleasant odours to form inside
the dishwasher is food that remains
trapped in the seals. Periodic
cleaning using a damp sponge will
prevent this from occurring.
1
B
C
Cleaning the sprayer
arms.
Food residue may become
filters.
encrusted onto the sprayer
arms and block the holes
where water comes out.
your Check the sprayer arms
regularly and clean them
once in a while (letters F
and I "How is it made?")
you will always
Your dishwasher is not a waste
Do not worry about removing every
single bit of food residue from your
dishes, but do get rid of bones, peel and
rind and any other left-overs before
placing them in the racks. Empty out
ARISTON DISHWASHER - Instructions for installation and use
D
1509)50-4
Once
once
spend a little time
A
2
on
assembly
sprayer
d i s i n t e g r a t o r !
all glasses and cups.
in a while,
a month,
the filter
and the
arms.
21