LAVAZZA A Modo Mio Jolie Plus Bedienungsanleitung Seite 31

COFFEE DOSE PROGRAMMING
Measures are always programmed using the same button;
any other buttons are ignored. The programmed amount
of brewed coffee can be changed by repeating the pro-
gramming.
If the programmed measure exceeds the maximum al-
lowed 8,7 fl.oz (250 cc) the machine will automatically
stop delivery, the delivery button will blink and the last
programmed measure will be saved in the memory.
If there is a power failure during programming, the last
programmed value remains in the memory.
If during a dose programming, water lack is indicated, the
machine stops the supply and the dose being programmed
won't be saved.
Once filled the water tank, repeat the dose programming
procedure.
Lift the capsule loading lever until it locks into position
to open the capsule fitting compartment.
Put a capsule into the capsule fitting compartment.
Lower the capsule loading lever to close the capsule fit-
ting compartment.
PROGRAMMING THE MACCHINE
Press and hold one of the two coffee delivery buttons
for at least 3 seconds.
The selected key will flash and the coffee machine will
enter the programming mode.
Once the desired amount of coffee has been obtained,
stop supply by releasing the button.
31
E N
3 sec.