Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
SHELF EVAPORATOR MAINTENANCE
The shelf evaporator must be defrosted every
month. Please do not remove the ice with metallic to-
ols like knives or screwdrivers, or with abrasive sponges.
Place a shallow receptacle below the front of the glass
cabinet. Remove the stopper at the bottom centre of
the glass cabinet: the water from the defrosting process
will be collected in the receptacle. When defrosted, ple-
ase wash the cabinet only with neutral soap, carefully
Basin water
dry the bottom of the tank and replace the stopper.
collecting
OCCASIONAL SHUTDOWN
LAMP REPLACEMENT
Unplug the cabinet. Remove the polycarbonate lamp
protection. Replace the fluorescent tube. Set up the
led bar
lamp and reassemble the polycarbonate lamp pro-
tection.
DOOR GASKET REPLACEMENT
Open the door. Remove the gasket from the door fra-
me. Replace it with the new one and make sure it is
positioned correctly along the whole perimeter.
HEATING ELEMENT REPLACEMENT
replacement gasket
Remove any food. The heating element is to be found
behind the door rabbet profile, covered by a round
section channel. It is therefore enough to remove the
latter in order to replace the element. To completely re-
move the heating element it is necessary to detach the
fast-on wire terminals inside the motor compartment.
Insert the new heating element cables into the appro-
priate hole at the bottom of the tank and complete the
wiring. Remount the protection channel.
resistance
15
Werbung
