Firmware Upgrade; Calibrating The Waver Mobile - Walimex Pro waver mobile Gebrauchsanleitung

Settings
The "Settings" menu offers a you a wide range of configurable
settings, such as image quality, face tracking speed or the length
of the countdown timer.
Face Tracking
1. Smile Shutter single
2. Couple shot
3. Group shot
Panorama
Select this function to take a panoramic shot from a tripod:
• First, use the threaded hole to fix the gimbal onto a tripod
• Then select the panorama function you want from the app
1. 180° panorama
2. 360° panorama
• Press the shutter release
• The app stitches the images into a single shot automatically
22
Magazine
When you take a photo, a preview of the shot is shown in the left
upper corner. If you tap to select the image, you then have the
option of creating a little magazine from within the app.

12. Firmware Upgrade

Visit the official Hohem Tech website at www.hohem-tech.com. On
this website, you can download the USB driver software, the iS-
teady T1 firmware upgrades, the current firmware for the iSteady
T1 and the latest, updated user manual for the iSteady T1 (waver
mobile).
Note
Always use and operate your device exactly as described in the
manual.

13. Calibrating the Waver Mobile

Method 1: Offline calibration
Hold the waver mobile as shown in the illustration. Hold the carry ring stationary on a horizontal surface.
Check the status LED: it will flash 3 times and then be permanently illuminated.
Now switch on the device and wait at least 3 seconds.
Press and hold the centre button on the joystick for longer than 6 seconds. All motors are now switched
off. The status LED on the function key comes on and stays illuminated.
Wait until calibration is complete.
Note
Hold the platform horizontal after you have placed the waver
mobile on the platform.
4. Switch off the waver mobile once calibration is complete.
5. Switch on the waver mobile.
6. Check that the waver mobile is in the same state as it was before calibration. You may need to perform
calibration again until the waver mobile is working perfectly.
Methode 2: Online-Kalibrierung
Besuchen Sie dazu bitte die offizielle Webseite von Hohem Tech http://www.hohem-tech.com. Laden Sie
hierzu die Kalibrierungssoftware für den iSteady T1 sowie die Anleitung für die Kalibrierung herunter.
23