Troubleshooting - Sandberg USB Multi Hard Disk Link Bedienungsanleitung

Now select the files that you want to back up.
On the left-hand side of the screen you will see
your computer's disk drive and on the right-
hand side the hard disk / the hard disks connected
to the adapter.
3. Select the folders and files on the left-hand
side of the screen that you want to back up.
4. Press the button on the top of the adapter. A
window will open on your screen.
5. Press the button again. Backup of the selected
files starts.
Figure 5
Every time you want to make a backup copy of
the selected files in future all you have to do is
press the button.
If you would like to change the files and folders
which are backed up, click the "Files backup"
icon in the PCClone EX Lite program.
NB: Your backups will be saved on the drive in
a hidden folder called FNET. If you want the
folder to be visible, you must select "Show
hidden files and folders" in Windows' Folder
view.

5. Troubleshooting

5.1 Partitioning
The connected hard disk(s) must be partitioned
so that the computer can read and write on them.
If this is a new unused hard disk, it has typically
not been partitioned. This can be done so as
follows:
1. Open Disk Management under Administrative
Tools -> Computer Administration in the
Windows Control Panel.
2. Highlight the hard disk's unallocated area as
shown in figure 6:
Figure 6
3. Right-click and select "New partition/volume".
Follow the instructions on the screen to
allocate the desired size and drive letter etc.
to the partition. We recommend selecting
primary partition, maximum possible capacity
and formatting in NTFS file format.
4. Formatting begins, after which the partition
is completed and can be accessed like any
other drive.
4