Technical Specifications; Technical Features; Electrical Specifications; Reference Guidelines - Ht Instruments Ht82 Bedienungsanleitung

6. TECHNICAL SPECIFICATIONS

6.1.

TECHNICAL FEATURES

6.1.1. Electrical specifications

Input voltage range:
Frequency voltage range:
Absorbed current (by phase):

6.1.2. Reference guidelines

Safety:
EMC:
Phase sequence indication:
Insulation:
Pollution degree:
Measurement category:
Max height of use:

6.1.3. Mechanical characteristics

Dimensions (L x W x H):
Weight:
Mechanical protection:
Power supply
From the mains.
Display
Characteristics:
6.2.

ENVIRONMENT

6.2.1. Environmental conditions

Working temperature:
Relative humidity:
Storage temperature:
Storage humidity:
This instrument satisfies the requirements of Low Voltage Directive 2014/35/EU
This instrument satisfies the requirements of European Directive 2011/65/EU (RoHS)
6.3.

ACCESSORIES

6.3.1. Standard accessories

• KIT82: set of 3 test cables + 3 alligator clips
• Carrying case
• User manual

6.3.2. Optional accessories

• 404-IEC#: test lead (# = color)
• 5004-IEC#: alligator clip (# = color)
• 5001-#: test cable (# = color)
40V ÷ 690V AC
15Hz ÷ 400Hz
1mA
IEC/EN61010-1
IEC/EN61326-1
IEC/EN61557-7
double insulation
2
CAT III 600V, CAT IV 300V to ground
2000m (6561ft)
130 x 69 x 22mm (5 x 3 x 1in)
130g (4ounces)
IP40
Custom with phase sequence and detected
phases indications
0°C ÷ 40°C (32°F ÷ 104°F)
<80%RH
0°C ÷ 40°C (32°F ÷ 104°F)
<80%RH
(LVD) and of EMC Directive 2014/30/EU
and 2012/19/EU (WEEE)
EN - 5
HT82