Sungrow AW-AM510-I Kurzanleitung Zur Installation Seite 17

8
If the SIM card is used for communication, complete the configuration by following the steps below.
*As the POS machine can only access the network by connecting to the router, configuration should be completed by
following the below steps only.
1
Network configuration
a
3
Router configuration
f
g
9
Restart the charger
11
Enable:
Static IP:
eth configuration: eth0
gateway: 192.168.1.1
2
OCPP configuration
b
c
d
e
10
·Third-party OCPP backend setting
Available websocket: Others; and
enter the websocket address in the
pop-up dialog box