ZAMEL supla INW-01 Gebrauchsanweisung Seite 22

2. WARNING
CAUTION
read and understood this User Manual and the product
features. Prior to installing and wiring this product, make
sure that the wiring to be connected is not live! The INW-01
is designed for indoor installation. During installation, make
sure that the device is not exposed to direct contact with
water and that it does not operate in a humid environment.
When installed outdoors, the device should be placed in an
additional enclosure of hermetic type and protected against
water penetration – in particular where connection terminals
are located. Do not open or otherwise disassemble the
product enclosure; otherwise the product warranty will be
void and an electrocution hazard may occur. The conditions
and methods of transport, storage and operation of this
product may affect its performance. Do not install the product
if any of its components is missing, the product is damaged or
deformed in any way.
If any malfunctions are found, consult the manufacturer.
The device must be connected to power
supply in accordance with applicable electri-
cal and safety standards or regulations.
See this User Manual for the wiring instruc-
tions. Installation, wiring and setting
of this product shall only be done by
qualified electrical engineers who have
22