Werbung
Verfügbare Sprachen
Verfügbare Sprachen
III.1) Kitchen machine (A)
Description (Fig. 1)
A1 – Multifunctional head release button
A2 – Speed regulating knob
A3 – Bottom mount for adapters C1 - C3
A4 – Front mount for attachments DC, EC
A5 – Release button
B1 – Stainless bowl
The model you purchased includes the attachments and adaptors specified in the
able at the end of this language version of the manual.
Food processor control
– Tilting the multifunctional head downward/upward (Fig. 2)
Rotating the release lever A1 slightly will lift the head upward. Rotating the lever A1
further and pushing the unit down will tilt the head downward.
– On/off switching of the food processor
Before you switch on the food processor, plug the power cord A10 into electric socket.
Then switch on the food processor by rotating the speed regulating knob A2. After you
finish working, switch off the food processor by rotating the speed regulating knob to
position 0.
– Speed control (Fig. 5)
Speed is controlled by setting the speed regulating knob A2 to the desired position
within the interval 1 - 2 - 3 - 4 - 5 - 6. For short operation time at the maximum speed, the
regulating knob can be set to position "P" (PULSE). The regulating knob must be held by
hand in this position. Releasing the regulating knob will return it to position
0 and stop rotating.
– Multifunctional head attachment security safeguard
In order to disassemble the food processor and to remove the attachments from A4 front
mount for attachments, apply a reverse procedure. Before removing the attachments
from the motor unit head, you first have to push the release button A5.
– Blender security safeguard
The food processor cannot be switched on, if the blender cover A8 is removed, and the
blender is not correctly fixed.
Food processing time depends on the volume, type and quality of the processed
ingredients. It usually takes several minutes under normal conditions.
III.2) Whipping, mixing whisk and kneading hook
Description (Fig. 1)
C1 – Mixing whisk
C2 – Whipping (wire) whisk
A6 – Removable cover
A7 – Multifunctional head
A8 – Cover
A9 – Blender mount F
A10 – Power cord
C3 – Kneading hook
35 / 85
EN
Werbung
