AER amp three Bedienungsanleitung Seite 11

2. Important Safety Instructions
The following guidelines shall help minimize the risk of injury through fire or electric shock.
C AU T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AT T E N T I O N
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
1. Carefully read these safety notes before you use
thedevice!
2. Keep these safety notes in a safe place.
3. Pay attention to all warnings, instructions and
additional texts on the unit.
4. This device was only designed for operation under
normal climatic conditions (temperate climate).
5. Do not install or use your amp in close proximity
towater or if you are wet yourself.
6. Do not subject your device to sudden and severe
temperature changes. This could cause moisture
condensation inside the unit, which could damage
it. In the event of moisture condensation allow the
device to dry out completely before use.
7. Use your amp in a safe place where nobody can
step on cables or trip over and damage them.
8. Pay attention to an unhindered air circulation
around the amp, never obstruct the air vents or
grilles.
9. Always pull the mains plug before cleaning your
amp or when left unused for a long period of time.
Use only a dry cloth for cleaning. Avoid the use
of detergents and do not let any liquids seep into
the unit.
10. Use only the right fuses with the same current
rating and trigger characteristic as replacements.
Never
mend fuses! Pull the mains plug before replacing a
fuse. Should a fuse blow again after a short while,
the device needs to be checked.
11. Never install your amp close to devices with
strong electromagnetic fields such as large mains
transformers, revolving machines, neon illumina-
tion etc. Do not lay signal cables parallel to power
current cables.
12. There are no user-serviceable components inside
the unit. To avoid the risk of an electric shock, the
unit must not be opened. All maintenance, adjust-
ment and repair works should be carried out by
qualified staff only. Any unauthorized tampering
The lightning flash with
the arrow head sym-
bolwithin an equilateral
triangle is intended to alert the
user to the presence of unisola-
ted ´dangerous voltage´ within
this product´s enclosure that
may be of sufficient magnitude
to constitute a risk of electric
13. In keeping with the EMV regulations screened
14. Always use an earthed power supply with the
15. Cable up your amp only when it is powered off.
16. This device should be installed near the socket
17. This product may cause permanent hearing loss.
Do not operate for long periods of time at a high
18. The product should be located away from heat
19. Do not place any open sources of fire, like candles,
20. Care should be taken so that objects do not fall
21. Do not place this device on an unstable cart,
alert the user to the presence of
important operating and mainte-
nance (servicing) instructions in
the literature accompanying this
product.
will void the 2-year warranty.
cables with correctly fitted connectors must be
used for all signal connections.
correct mains voltage. If you are in doubt about
the power outlet ground, have it checked by a
qualified technician.
outlet and disconnection of the device should
be easily accessible. The mains plug of the power
supply shall remain readily operable. Protect the
power cord from being walked on or pinched
particularly at plugs, convenience receptacles and
the point where they exit from the apparatus.
volume level or at any level that is uncomfortable.
If you experience any hearing loss or ringing in the
ears, you should consult an audiologist.
sources such as radiators, heat registers or other
products that produce heat.
on the device.
onto the device and liquids are not spilled into
the enclosure through openings. Ensure that no
objects filled with liquids, such as vases, are placed
on the device.
stand, tripod, bracket or table. The
device may fall, causing serious injury to
you and serious damage to the device
itself.
The exclamation point
within an equilateral
triangle is intended to
11