Product Data; Performance Specifications - Xylem Flojet R2830 Serie Installations- Und Bedienungsanleitung

Installation & Service Information for 02830 / R2830 Series

PRODUCT DATA

Pump design
Wetted parts:
Diaphragm material
Check valve material
Housing material
Accumulator tank:
Diaphragm material
Tank material
Tank volume
Tank max Pressure
Tank pre-charge pressure
(Factory)
Ports
Net weight
PERFORMANCE
System performance tested with 60 PSI (4.1 Bar) accumulator
pre-charge air pressure and regulated 30 PSI (2.1 Bar) of city water
pressure.
95 (6.55)
90 (6.21)
85 (5.86)
80 (5.52)
75 (5.17)
70 (4.83)
65 (4.48)
60 (4.14)
55 (3.79)
50 (3.45)
0 5 10 15 20
Pump Service
30 = Triplex
Suppression
0 = No Suppression
R = Suppression
4 Gallon Booster Pump System
Triplex Diaphragm
Santoprene
EPDM
Nylon
Butyl
SS304
4 Gal (15.1 L)
116 PSI (8 Bar)
10 PSI (0.7 Bar)
3/8" or 1/2"
HB Inlet and Outlet
17.5 LBS (7.9 kg)
(DRAW DOWN CURVES)
8 oz
25 30 35 40 45 50
Time (sec.)
STANDARD MODEL NUMBERING SYSTEM
Voltage
0 = 115VAC NA Plug
2 = 100-230VAC (24VDC) EU, RU Plug
3 = 100-230VAC (24VDC) AU, CN Plug
4 = 100-230VAC (24VDC) UK Plug

PERFORMANCE SPECIFICATIONS

Input Voltage:
115VAC (50/60Hz)
Max Amp Draw @ 115VAC
Standard North American
Type B plug
230VAC (50/60Hz) with
AC/DC Power Adapter
(Output voltage: 24VDC)
Max Amp Draw @ 24VDC
Plug options (Type F [EU],
G [UK], I [AU/CH])
Max Flow
Max Pump Inlet Pressure
Max Operating Pressure
(Pressure Switch Setting)
Liquid Temperature:
Min
Max
Priming:
Dry
2 oz
Wet
Pressure Switch:
Cut-Off Pressure
4 oz
Cut-In Pressure
CERTIFICATIONS
System
Pump
6 oz
Tank
55 60
X 28 X X — X X X X
Switch
5 = 87 PSI (6 Bar)
2
0.9 A
4.7 A
1.5 GPM (5.7 LPM)
@ 0 PSI (0.0 Bar)
30 PSI (2.1 Bar)
87 PSI (Bar)
34°F (1.1°C)
120°F (49°C)
5 FT. (1.5 M)
15 FT. (4.6 M)
87 PSI (6 Bar)
55 PSI (3.8 Bar) Min
NSF 18 Component
NSF 18, UL Listed
(US only)
NSF 61
Tank Size
0 = Inlet: 3/8" SS Hose Barb
4 = 4 Gal (15.14 L)
Elbow x 3/8" SS MNPT
Outlet: 3/8" SS Hose Barb
1 =
Inlet: 3/8" SS Hose Barb
Elbow x 3/8" SS MNPT
Outlet: 1/2" SS Hose Barb
Inlet: 3/8" SS Elbow x QD
2 =
Outlet: 3/8" SS Hose Barb
3 =
Inlet: 3/8" SS Elbow x QD
Outlet: 1/2" SS Hose Barb
4 = Inlet: 1/2" SS Elbow x QD
Outlet: 1/2" SS Hose Barb
Fittings