Haier HF 6B4S1PX Bedienungsanleitung Seite 106

Follow the instructions supplied

with the product.
WARNING:
(only built-in
integrated models)
Do not connect the dishwasher
to the mains supply until all
installation operations have
been performed according
to the "TECHNICAL NOTES
FOR INSTALLATION" supplied
with the product.
WARNING:
(only built-in
integrated models)
Do not connect the dishwasher
to the mains supply until the
front panel has been fully
installed. Otherwise, the risk
of an electrical hazard may
persist.
WARNING:
(only freestanding models)
If it is necessary to remove
the worktop to install the
dishwasher in a compartment
of a modular kitchen, please
contact our
Technical Assistance Centres.
and semi-
and half
Authorized
106
WARNING:
Ensure that
before being switched on for
the first time, is installed in a
horizontal position by way of
the adjustable feet.
Check the horizontal position
using a spirit level
Replacement of the inlet hose
In case of breakage, the hose

must be replaced with an
original spare part available
from the manufacturer or its
service center.
WARNING:
Use only the
supplied with the appliance
for connection to the water
mains. Old inlet hoses must
not be reused.
Remove the

device (A) by unscrewing the
fixing screw (B).
Remove the inlet hose (C) by

unscrewing the ring nut (D).
the product,
inlet hose
anti-removal