Himiway D5 Pro Benutzerhandbuch Seite 9

Bike Assembly Guide
◆ Preparation Checklist
Headlight Derailleur guard
Pedals Hex wrench
Extra tools needed: (1)10mm Wrench
NOTICE:
1. Please keep the original packaging for at least 15 days!
2. Before assembling your bike, it's recommended to remove the battery for the
reasons outlined below:
• Determine if there's battery drain or damage during shipping.
• Reduce the weight of the ebike to make it easier to maneuver the bike while
assembling.
• Avoid battery damage during the assembly process.
Go to page 16 to learn about removing and charging the battery.
*Follow our Youtube channel Himiway Bikes to watch bike assembly tutorials！
Power cable Transformer
(2)15mm Wrench
Recommended Torque Values
Hardware Location
Handlebar
Stem
Saddle
Front Wheel(For bikes with bolts on front wheel)
Rear wheel
Bottom Bracket Parts
Pedals
Disk Mounting Bolts
Disk Caliper Mount
Crank Bolts
Rear Derailleur Cable Pinch
Front Derailleur Clamp
Saddle Post Clamp
NOTICE: Using an impact driver to achieve the required torque is not
recommended as it might cause damage. We suggest you use the wrench set we
provided and extra tools to manually adjust nuts and bolts.
6
Recommended Torque(NM)
12-18
12-18
12-18
15-22
30-38
30-50
28-33
3-5
6-8
32-36
3-5
3-6
3-6