Herunterladen Diese Seite drucken

Himiway D5 Pro Benutzerhandbuch Seite 23

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Carrying Loads & Cargo
Total Payload Capacity of Himiway D5 pro: 181kg (400 lb.)
◆ Cargo Safe Operation Tips:
The following list provides important tips for the safe operation of the Himiway D5 pro
when used for carrying cargo:
1.
Make sure to load the cargo as low as possible to lower the center of gravity and
improve stability.
2.
Ensure your loads are properly secured and periodically check that nothing has
loosened.
3.
Plan your route accordingly when cargo is loaded on the Himiway D5 pro, considering
hill climbing ability, steering, and braking. Also account for moderately reduced range
when carrying extra cargo weight (or an additional passenger).
4.
Try to get a feel for the cargo load in a flat and open private area before riding on
public roads.
5.
Make sure to not use the front brake by itself, with or without cargo. Always apply the
rear brake first followed by the front brake. Failure of the front fork or loss of control
is possible when the front brake is operated independently, especially at higher
speeds.
6.
The kickstand is not designed to hold the bike upright with cargo by itself, always
manually hold the bike upright when loading or carrying cargo.
WARNING:
Different materials and components may respond differently to stress
and wear. If a component's service life is exceeded, it can suddenly fail and there
is a risk of injury. Any form of cracks, scratches or color changes on highly
stressed components indicate that the component life has expired and the part
should be replaced.
Weight: 36kg (80 lb.)
20
Safety and Care Instructions
To ensure safe riding conditions and maximize e-bike longevity, you must follow the
guidelines outlined below:
To clean the e-bike, wipe the frame with a damp cloth soaked in a mild, non-abrasive,
non-corrosive detergent mixture. Wipe or spray all unpainted parts with anti-rust
treatment after being used in coastal areas or areas with salty air or water.
Never use a pressure washer when cleaning your bike.
Never immerse the bike or any components in water, as the electrical system may be
damaged. If the hub and bottom bracket bearings have been submerged in water,
they should be removed and re-greased (this will prevent accelerated bearing
deterioration).
Periodically check wiring and connectors to ensure there is no damage, and the
connections are secure.
Store under shelter, avoiding extended exposure to cold or inclement weather. If
exposed to rain or excess moisture, dry your bicycle afterward and apply anti-rust
treatment to the chain and any other unpainted steel surfaces.
Regularly clean and lubricate all moving parts, tighten components and adjust as
required.
Your cables, spokes, and chain will stretch after an initial break in period of 80-160
km, and additionally bolted connections can loosen with time and usage. Therefore,
we suggest you contact a certified bicycle mechanic every two months to ensure
your bike is safe and problem-free for years of use.
If the paint has become scratched, or the metal chipped, use touch-up paint to
prevent rust (clear nail polish can also be used as a preventative measure).
Damage from corrosion is not covered under warranty, therefore special care should
be given to protect and extend the life of your bike.

Werbung

loading

Diese Anleitung auch für:

D5 pro st