Himiway D5 Pro Benutzerhandbuch Seite 14

Adjust the Seat Angle:
Step 1: Loosen the seat adjustment bolt beneath the seat. Move the seat backward or
forward and tilt to adjust the angle within the limit markings etched on the seat
rail. Do not exceed the limit markings, to ensure the safety of yourself and the
bike.
Step 2: Tighten the seat adjustment bolt. Ensure the top and bottom of the seat rail
clamp are aligned, so that the seat adjustment bolt will clamp the seat rails
together properly.
NOTICE: The seat angle has been preadjusted to factory safety standards. Please
make note of original settings, and only adjust if necessary.
◆ After Bike Assembly
Please write down the serial numbers found on the head tube, battery and motor on the
inside front cover of this manual to facilitate failure reporting. Make sure each letter and
number is correct.
Make sure you take down Make sure you take down
the Capital Letters here! the Capital Letters here!
Bike frame number
Motor serial number
NOTICE:
1. Before using your bicycle, find out about all relevant requirements and
regulations that apply in your country or state. There may be restrictions on riding
on public roads, bike lanes or trails. There may also be requirements for helmets,
age restrictions, driver's license requirements or bicycle light regulations.
2. When installing an accessory on your bike, such as a cargo trailer or child trailer,
make sure the accessory is compatible and follow the manufacturer's and
retailer's instructions.
11
Battery serial number