Werbung
Verfügbare Sprachen
Verfügbare Sprachen
13.WARNlNG!
The interior of the car can become very hot when exposed to direct sunlight.
Therefore,
it is recommended
of upholstery
and components,
child!
14.WARNlNG!
Do not use the car seat in the house. It is not designed for home use and should only be
used
in the
vehicle!
15.WARNlNG!
Before you set any mobile or adjustable
child
from
the
child
seat!
16.WARNlNG!
Periodically check the belts for wear, paying special attention to the points of attachment,
protections
and regulating
17.WARNlNG!
Do not leave the buckle in a partially closed position and it must only lock when all parts are
engaged. It must be possible to release the child from the restraint immediately in an emergency.
Your child must be taught
18.WARNING! The baby seat must be secured with car safety belt, even when it is not in use.
An unsecured
seat may injure other passengers
19.WARNING!
Store this child seat in a safe place when it is not being used. Avoid placing
objects on top of it. Do not allow your child seat to come into contact with corrosive
battery
acid.
WASHING
INSTRUCTIONS
1. The car seat can be cleaned
or thinner.
2. The cover should be washed by hand at a maximum temperature of 300C. Do not put in the dryer, just airing
it.
3. The plastic parts can be cleaned by using a wet cloth. Please, do not use any solvate.
TYPES
OF APPROVED
Your
child
seat
movement of the car with the help of 3-point belts!!!
Your child seat can be installed with ISOFIX
tether, in the direction of movement for Group 1 ( 9- 18 kg.)
Possibility to install ONLY on seats with 3-point seat belts
for Groups
CAN NOT BE USED FOR SEATS with 2-point
Parts
Picture
1
1. Backrest
2. Guide
for the belt
3. Belts
4. Belts
softener
5. Belt
buckles
6. Button to adjust the belt (under the cover)
7. Strap for belts adjustment
8. Seat
9. Bracket for positioning the belt in the car
Assembling
the car seat
1. Place the seat and backrest horizontally on a flat surface. Picture 2 Place the hooks on the backrest in the openings
of the seat. Picture 2a Squeeze with hand the hooks on the backrest (2.1) and press firmly, lift the seat in a vertical
position (2.2).
Warning:
Failure to comply with this instruction leads to breaking the hooks on the backrest, which is not subject to
warranty!
Notice: During assembling or dismantling in the vehicle, it is possible that the backrest of the seat moves from the
vertical position. This is not a defect in the seat, because the position of the backrest is determined by the position of
the
backrest
of the car seat!
Pull back up to make sure it is fastened
that the child
and especially
devices.
never to play with the buckle.
using lukewarm
BELTS
TO HAVE
can
be installed
ONLY
(18-36
kg.) !
to the seat.
seat is covered
when not used. This prevents
those attached to the child seat and scorching
part of the child seat, you need to remove your
in the car in an urgent stop!
water and soap. Do not use aggressive
IN THE
CAR
in the direction
of
anchorages and top
belt!
10. Metal clamp
11 . Bracket
12. Top Tether Strap
13.. TT Release
14. ISOFIX
15. ISOFIX
16. ISOFIX
17. Head
18. Baby Insert
19. Headrest
20. Headrest
substances
ECE
R44/04
cleaners
x
for shoulder
belts
button
Release
button
Connector
Adjustment
Handle
Pillow
Handle
heating
the
heavy
e.g.
like abrasives
Werbung
