ELNA 745 Gebrauchsanleitung Seite 48

FLATLOCK 3
Select 3 and set up machine.
Three threads form an unbalanced stitch that
can be pulled open into a flat seam. The seam
resembles the exposed stitch seen on ready-
to-wear sweatshirts and knit sportswear.
Common Uses
•
Construction method for bulky knitwear.
•
Decorative accent.
Thread in the following sequence:
1
yellow thread for upper looper (F)
2
green thread for lower looper (G)
3
blue thread for R1 needle (B2)
BLANKET
Select 4 and set up machine.
An edge finish that uses decorative thread in
the needle. The upper and lower looper
threads pull the needle thread so it is visible
on both the top and underside of the fabric.
Common Uses
•
Edge finish for a single layer of fabric like
a blanket or felted scarf.
•
Decorative accent.
IMPORTANT: Use medium weight decorative
thread in the needle and wooly nylon thread in
both loopers.
Thread in the following sequence:
1
yellow thread for upper looper (F)
2
green thread for lower looper (G)
3
blue thread for R1 needle (C)
NOTE: Bypass blue tension disc. Thread
should go directly from antenna to thread
take-up area.
The "ridge" of the stitch may form to the top
side of the fabric. Simply rotate it to the edge
with your fingers.
48