EDIFIER R33BT Bedienungsanleitung Seite 10

No sound
• Check if the speaker is ON.
• Try to turn up the volume using the volume control.
• Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
• Check if there is a signal output from the audio source.
Cannot connect via Bluetooth
• Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes,
Bluetooth will not connect. Disconnect from any Bluetooth device by pressing and holding the "
button, then try again.
• Effective Bluetooth transmission range is 10 meters; please ensure that operation is within that range.
• Try another Bluetooth device for connection.
The R33BT does not turn
• Check if main power is connected or if the wall outlet is switched on.
Noise coming from speakers
• EDIFIERspeakers generate little noise, while the background noise of some audio devices are too high.
Please unplug audio cables and turn the volume up, if no sound can be heard at 1 meter away from the
speaker, then there is no problem with this product.
To learn more about EDIFIER,please visit www.edifier.com
For EDIFIERwarranty queries, please visit the relevant country page on wmv.edifier.com
section titled Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or wvw„'.edifierla.com (Spanish/Portuguese) for ocal
contact information.
on
Troubleshooting
and review the
Engl'sh