Explanation Of Symbols; General Information - Hazet Twin Turbo 9013MTT Betriebsanleitung

1. General information

• Please make sure that the user of this tool
carefully reads these operating instructions
and fully understands all the information
provided before using the tool for the first
time.
• These operating instructions contain impor-
tant advice that is necessary for safe and
trouble-free operation of your HAZET tool.
• For intended use of the tool, it is essential
that all safety and other information in these
operating instructions is adhered to.
• For this reason, always keep these operat-
ing instructions together with your HAZET
tool.
• This tool has been designed exclusively for
specific applications. HAZET emphasises
that any modification to the tool and/or use
in a way that does not correspond to its
intended application is strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damage to property originating
from improper or inappropriate application,
misuse of the tool or a disregard of the
safety instructions.
• Furthermore, the general safety regulations
and regulations for the prevention of acci-
dents in the application range of this tool
must be observed and respected.
; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid •
[ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de
1
For your information
HAZET-WERK Hermann Zerver GmbH & Co. KG Always wear personal protective equipment!

2. Explanation of symbols

ATTENTION: Pay strict attention
to these symbols!
READ THE OPERATING INSTRUCTIONS!
The owner of this tool is
obliged to observe the oper­
ating instructions and instruct
any users of this tool accord­
ing to the operating instruc­
tions.
NOTE!
This symbol indicates advice
that is helpful when using the
tool.
WARNING!
This symbol indicates impor­
tant descriptions, dangerous
conditions, safety risks and
safety advice.
CAUTION!
This symbol indicates advice
which, if disregarded, results
in damage, malfunction and/
or functional failure of the
tool.
QUALIFIED PERSONNEL!
The tool may be used by qua­
lified personnel only. Handling
by non­qualified people may
lead to injuries to persons
or damage to the tool or the
workpiece.
11