Product Description; Set - CONDTROL Unix 360 Green Pro Bedienungsanleitung

CONDTROL UniX 360 Green Pro
H
18
17
15
14
8
12
11
13
16
CONDTROL UniX 360 Green Pro
EN CROSS LINE LASER

PRODUCT DESCRIPTION

This cross line laser UniX 360 Green Pro CONDTROL is intended for determining and checking
horizontal and vertical lines. (see figure A-C). This mode allows constructing inclined planes
(see figure D).
The measuring instrument is suitable for operation in enclosed working sites and outdoor.
It has 2 operation modes:
- working with automatic levelling. Levelling function automatically compensates
irregularities within the self-levelling range of ±5°(see figure E,F).
- working without automatic levelling for inclined planes. (see figure D)
PULSE mode allows to use laser receiver to increase a working range of the instrument or to
work when laser is hard to define in bright lighting conditions.
1 - Laser lines apertures
2 - Switch on/off laser lines
3 - Activate pulse mode / locked mode
4 - Low battery indicator
5 - Pulse mode indicator
6 - Battery cover
7 - Tripod thread 1/4''
8 - Switch bar
9 - Screw mount
10 - Power plug
11 - Tripod with elevating head 1/4"*
12 - Tripod-Transformer*
13 - Universal Wall Mount *
14 - Pouch
15 - Laser intensive Glasses*
16 - Electronic Receiver*
17 - Tripod 1/4''*
18 - Universal mount Clamp*
* not included in the delivery set

SET

Cross line laser – 1 pc.
Pouch – 1 pc.
Batteries (type АА) – 4 pcs.
Power cable – 1 pc.
User manual – 1 pc.
User manual
9