Hach pH/ORP Module Bedienungsanleitung Seite 14

Table 3 pH and ORP sensor wiring – sensors with removable cables (continued)
Terminal
Sensor shield wires—Connect all sensor ground/shield
wires to the controller enclosure grounding screws.
Notes:
Table 4 pH and ORP sensor wiring – sensors with removable cables (continued)
Terminal
8-pin (J5) 1
2
3
4
5
6
7
8
2-pin (J4) 1
2
Sensor shield wires—Connect all sensor
ground/shield wires to the controller enclosure
grounding screws.
Notes:
14 English
Description
Description
S7 double
shielded
Reference Inner stranded
wire (silver)
Ground solution Jumper 1–2 on J5
–V supply
—
—
Temp
Temp/–Circuit low
—
Active Transparent
—
Outer stranded
wire (copper)
Cable type (connector)
Top68 (with temp)
—
Green/yellow
—
The yellow and
brown wire are not
Cable type (connector)
S7 single
shielded
Inner stranded
wire (silver)
Jumper 1–2 on J5
— —
— —
— —
— —
— —
— —
Transparent
— —
—
— —
SMEK VP-Plug
(Green/yellow)
The gray wire is not used.
used.
AS9
Outer stranded Outer stranded
wire (copper) wire (copper)
Jumper 1–2 on J5 Jumper 1–2 on J5
—
—
—
—
—
—
Transparent Transparent
(core)
—
—
—
MP4
—
—
—
Brown
White
—
(core)
—
—
—