Thomas Regout BalanceBox 650-II Installationsanleitung Seite 14

BalanceBox
FAQ: Frequently Asked Questions
6. I have finished the installation, but the panel is too low in the top or bottom position:
6. Remove the panel from the BalanceBox
EN
manual or the sticker on the front of the BalanceBox
7. I have finished the installation, but the panel is too high in the top or bottom position:
1. Remove the panel from the BalanceBox
manual or the sticker on the front of the BalanceBox
® 650-II
® , move the VESA bracket to the highest position (1). See the
® .
® , move the VESA bracket to the lowest position (3). See the
® .
14