Adjusting Fade Speed And Hold Time - Kapego XS PRO Bedienungsanleitung

Program 7
Program 7
Program 7
Attention!! The program 5 working with random generators. This generator reacts as well if you
connect more than one controller. That creates an unique effect with different stripes for example at a
thunder storm simulation when some flashes coming from left and some from the right, random and
naturally.

3.4. Adjusting Fade Speed and Hold Time

With these button you can adjust the fade time and hold time of the different programs. To understand
how the two valueas are reacting to each other check the drawing below.
1s
Hold Time
That means that you can change programs as you desire.
Attention!! There are programs as well, which you cannot affect with this function. These programs are
fixed because the effect would not work if you would change them.
If you choose to stretch the time for a colour staying light up, you have to + the hold time
And if you want to stretch the time the fade of one colour to an other needs, you can + the fade time.
With the clear function you can set all programs except the use programs back to manufacturer's
settings.
Strobe Coldwhite
This is a pure coldwhite strobe effect. By using Fade speed you can adjust the
hertz rate of the flashes. (1,2,5,10Hz)
Strobe Warmwhite
This is a pure warmwhite strobe effect. By using Fade speed you can adjust
the hertz rate of the flashes. (1,2,5,10Hz)
Color Change
Here several colours will be faded into each other. . In this case fade speed
changes the proportional part of the fade time and the hold time adjusts the
holding time of the color before it starts to fade again.
1s
5s
Hold Time
X S P R O W H I T E C O N T R O L
„FADE SPEED"
„FADE SPEED"
„FADE SPEED" "HOLD TIME"
1s
5s
12 / 14
5s
Hold Time