Celestron StarSense Explorer DX Kurzanleitung Seite 4

Attaching the
Smartphone
Your First
Night Out
For more information on this product, please visit the respective product page on celestron.com
SOLAR WARNING:
Never attempt to view the sun through any telescope without a proper solar filter.
Need assistance?
Contact Celestron Technical Support celestron.com/pages/technical-support
©2023 Celestron. Celestron and Symbol are trademarks of Celestron, LLC.
All rights reserved. Celestron.com
2835 Columbia Street, Torrance, CA 90503 USA
This product is designed and intended for use by those 14 years of age and older.
Made in China
03-23
4 | ENGLISH
1 1
Remove the large cap covering the mirror on the front
of the StarSense dock.
Congratulations! Your telescope is now set up
and you are ready to explore the cosmos. Take the
telescope outside, insert your 25 mm eyepiece,
remove the lens cap, insert your smartphone into the
holder, and launch the StarSense Explorer app. The
tutorial in the app will walk you through the steps on
finding your first astronomical target.
2 2
Pull open the spring loaded slider on the top of the
phone dock and set the phone into the holder so
it is flush with the bottom lip of the phone holder.
Slowly release the slider to secure the phone in
place. Most phones fit into the dock with the case
on. However, you may need to remove your phone
case if it is especially bulky or unable to fit into the
clamp (i.e. folio style cases).
www.celestron.com/pages/warranty