Livescribe Paper Tablet Benutzerhandbuch Seite 8

Launching Livescribe™ Paper Tablet
As with other smartpen applications, you can launch the Livescribe™ Paper Tablet using the Nav Plus
menu or Launch Line. See the Livescribe Smartpen User Guide for details about these commands.
Launching Livescribe™ Paper Tablet with Launch Line
Using Launch Line, you can quickly launch the Livescribe™ Paper Tablet application.
To create and use Launch Line for Livescribe™ Paper Tablet:
1.
With no other applications running, draw a horizontal line on your notebook (starting from right or
left) and without removing your smartpen tip from the page, immediately double back on the line
ending close to where you started.
2.
Immediately begin writing the word Tablet above the line. As you write the first few letters, look at
your smartpen display. If it shows the "Tablet" command, double-tap anywhere on the page to run it.
You do not need to finish writing the whole command name.
3.
Tap a page to use as your Tablet Page. When you tap a page to select it, it uses the default page
orientation for the paper product. Usually, this is portrait mode. If you want to change the
orientation, instead of tapping the page, draw a short vertical line in the desired orientation. See
Specifying Page Orientation on page
N :
OTES
•
To launch the Paper Tablet at a later time, tap on the Launch Line name. The name remains as an
active "button" that you can tap at any time to launch the application.
•
While Tablet mode is active, you can still use other smartpen applications and functions.
Launching Livescribe™ Paper Tablet from the Nav Plus
1.
Connect your Echo smartpen to your computer using its micro-USB cable.
2.
Tap the center of a Nav Plus to get to the Main Menu.
3.
Tap down to scroll to the Applications menu.
™
Livescribe Paper Tablet User Guide
8.
Launching Livescribe™ Paper Tablet
4