Silvercrest SOUND SPOT Bedienungs- Und Sicherheitshinweise Seite 25

˜ Establishing a Bluetooth
Remove all plugs from the AUX-in jack 2 before you attempt to
establish a Bluetooth
Switch on the playback device and make sures its Bluetooth
is on.
On the product press the
LED 8 flashes white and a signal tone sequence sounds. The
product will now attempt to connect to the playback device (e.g.
smartphone or computer).
The product identification on the playback device will be "SOUND
SPOT". On the playback device "ACCEPT" the connection. Please
note the requirements of the software on the playback device.
Once the connection is made the LED 8 will light up white and a
signal tone sequence sounds.
The maximum range of the connection is approx. 10 m,
but this may be reduced due to the geometry of the space
(obstructing furniture, walls, etc.).
26 GB
connection.
®
button 11 for 2 seconds until the
connection:
®
mode
®