Sega Master System II Bedienungsanleitung Seite 10

TV Channel Setting
(Except French Model)
BACK VIEW OF POWER BASE
RF OUT AC-ADAPTOR
mm ess:
= ©
О
+ Channel Switch RF Jack АС Adaptor Jack
(CHO-CHI
ср) * Australia model only
** New Zealand model only
[Australia/New Zealand Models] [Other Countries]
‚ Set the Channel Switch on the back
of the Power Base to CH 0/2.
N
Set your TV to channel 0/2.
E
Switch on your Power Base.
>
If channel 0/2 is used for
broadcasting, set your TV to
channel 1/3. Then, be sure to switch
the Channel Switch on the Power
Base to CH 1/3.
m
If your TV has an automatic fine
tuning control (AFC), turn it off and
manually adjust the picture.
However, if you have a color TV
that turns black and white when the
AFC is turned off, leave the AFC on.
6. To return TV to normal operation,
turn off the Power Base and change
the channel on the TV.
1.
La
=
Switch on your Power Base.
Tune in your TV set on an unused
channel (in accordance with the TV
manufacturers' instructions). The
Sega picture should appear on
channel 36.
If your TV has an automatic fine
tuning control (AFC), turn it off and
manually adjust the picture.
However, if you have a color TV
that turns black and white when the
AFC is turned off, leave the AFC
on.
. To return TV to normal operation,
turn off the Power Base and change
the channel on the TV.