Charge The Battery; Remove The Battery - Jobobike Sam Bedienungsanleitung

11.3 Turn the key clockwise once to make the lock cylinder
extend through the hole to lock the battery.(The battery is
not activated in this state)
11.4 Turn the key clockwise again to activate the battery(in
this state you can turn on the led light).
Note: Please turn the key anti-clockwise once to turn
off the battery when you don't use the bike.

Remove the battery:

12.Hold the key and press it hard, then turn the key anti-
clockwise to make the lock cylinder retract through the hole.
Take the battery out of the frame.

Charge the battery:

13. Open the cover and plug the charger into the battery
socket.
14.Battery capacity Indicator(press the button and you will
see the light)
16
0ne red light + two Green lights:
High power
0ne red light + one Green light:
Middle power
Just one red light:
Low power