10. MORE FUNCTIONS
All system settings are listed in the System submenu.
The device menu is not available in Bluetooth® operating mode.
>
Open the MENU by holding down the MENU button and use the ,
[System] entry. Press the SELECT button.
>
This procedure is assumed for the settings described below.
10.1 Language
>
In the [System] submenu, use the ,
Press the SELECT button.
>
Use ,
to select one of the available languages and confirm the selection by pressing the SELECT
button.
10.2 SW version
At this point you can display the firmware version installed on the device.
>
In the [System] submenu, use the ,
Press the SELECT button.
70
EN
keys to select the [Language] entry.
keys to select the [SW ver.] entry.
buttons to select the