Imperial DABMAN GO Bedienungsanleitung Seite 69

8. BLUETOOTH MODE
®
8.3 Cancel pairing
To cancel an active pairing, press and hold the SCAN/ SELECT button until [BT LINK] flashes on the
display. Please note that the device to be unpaired must be connected to the DABMAN GO if you want to
unpair it. You can then pair a new device as described under point 8.2.
Alternatively, you can also cancel the pairing on your external device.
Please note the instructions in the operating instructions for your external device.
9. AUX-INPUT
You can also playback an external device via the analog AUX input device
reproduce. Connect the external device to the AUX port of the device using a 3.5 mm stereo jack cable.
Adjust the volume of the external device to a high level and then adjust the volume on the DABMAN GO.
If the volume on the external device is too low, noise may occur during sound playback.
69
EN