Imperial DABMAN GO Bedienungsanleitung Seite 62

6. DAB+ MODE
6.5 Signal Strength
> Briefly press the INFO/MENU button several times until the signal strength bar is displayed.
The signal strength is shown in the display using a bar graph. The mark shows the minimum signal
strength. Transmitters whose signal strength is below the required minimum signal strength do not
send a sufficient signal. If necessary, reorient or change the location of the antenna.
6.6 Set manually
This menu item is used to check the reception channels and can be used to align the antenna.
Furthermore, stations can be added manually if they have not yet been saved in a search.
> Open the MENU by holding down the MENU button and then use the ,
entry [Manual]. Press the SELECT button.
> Use the , buttons to select a channel (5A to 13F) and press the SELECT button.
The signal strength will now be shown on the display. Becomes a DAB+ station on one channel
received, the station's ensemble name is displayed. The antenna can now be aligned for maximum
signal strength.
62
EN
buttons to select the