Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GETTING STARTED
GETTING STARTED
5. OPERATING
Carefully remove the unit and all accessories from the package.
Carefully remove the unit and all accessories from the package.
1. Connect one end of the supplied USB Type-C cable to the DC IN 5V port
1. Connect one end of the supplied USB Type-C cable to the DC IN 5V port
5.1 Prepare the device for operation
on the speaker and the other end to a USB AC adaptor (commercially
on the speaker and the other end to a USB AC adaptor (commercially
available), and then connect the USB AC adaptor to an AC outlet.
Before using the device for the first time, you should fully charge the battery.
available), and then connect the USB AC adaptor to an AC outlet.
The speaker supports USB AC adaptors that are capable of delivering an
The speaker supports USB AC adaptors that are capable of delivering an
>
Use the included USB charging cable to connect the device to a USB power supply, e.g. on a PC,
output current of 1.5 A. Use of any other devices is not guaranteed for
output current of 1.5 A. Use of any other devices is not guaranteed for
battery charging.
battery charging.
a USB charger or a notebook.
>
As soon as the power supply is established and the charging process starts, the status LED flashes.
After fully charged, the LED goes out.
•
When the recommended USB AC adaptor capable of delivering an
output current of 1.5 A is connected, charging completes in about 5
•
When the recommended USB AC adaptor capable of delivering an
hours* and the CHARGE indicator turns off.
output current of 1.5 A is connected, charging completes in about 5
•
When using a commercially available USB AC adaptor, make sure that it
hours* and the CHARGE indicator turns off.
is capable of delivering an output current of 1.5 A or more. You can use
•
When using a commercially available USB AC adaptor, make sure that it
a USB AC adaptor with an output current of 500 mA or more and less
56
EN
is capable of delivering an output current of 1.5 A or more. You can use
than 1.5 A as well, but it may take a very long time (10 hours or more*)
before charging completes. When using such a USB AC adaptor, it is
a USB AC adaptor with an output current of 500 mA or more and less
EN
3. Press the Power button to to turn on the unit. To turn off, Press the
Power button 3 seconds or Power 'off'.
Note: Before you switch on for the first time, charge the battery for at least
3 hours.
EN
EN
Charging
Fully charged
Werbung
