Imperial DABMAN GO Bedienungsanleitung Seite 68

8. BLUETOOTH MODE
®
8.2 Pairing an external device
To connect an external device, e.g. To pair a smartphone or tablet with the DABMAN GO:
®
> Start Bluetooth mode as described under point 8.1.
> [BT LINK] flashes in the display.
> Now start searching for nearby Bluetooth
You may first need to activate the Bluetooth
How to activate the Bluetooth
please refer to the operating instructions for your external device.
During the pairing process, both devices should be within 10 cm.
> IMPERIAL DABMAN GO should now appear in the list of Bluetooth
device. Tap it to complete the pairing process.
> [BT LINK] is shown permanently in the display if the pairing process was successful.
Depending on the Bluetooth
Control playback buttons on the DABMAN GO:
Play/Pause - SCAN/
Running title from the beginning -
68
EN
®
®
function on your external device and perform a search,
®
protocol of your external device, you can play music via the
SELECT/ Next track - button
/ Volume - Volume +/- buttons
devices on your external device.
®
function on your external device.
/ Previous track -
®
devices found on your external