Product Guarantee; Adjust Time - Opus R90 Wartungsanleitung

ENGLISH

PRODUCT GUARANTEE:

The product is guaranteed as per Italian Presidential
Decree 224 of 24/05/1988 in Italy and the rest of
the EU and as per CEE Directive 85/374 in terms of
product liability.
The Manufacturer guarantees its products against
manufacturing and material defects – provided
these are confi rmed by the authorised personnel of
the Company – for a period of 24 months from the
purchase date, as indicated by the receipt or invoice.
The guarantee covers repairs to and/or replacement
of the parts considered to be faulty. The guarantee
does not cover complete replacement of the product.
The guarantee does not cover expendable materials,
the replacement of pieces subject to normal wear
as a result of use, such as "lights, warning lights,
fuses, glass parts, mirrors and decorative parts
unless these are faulty due to production defects
and not due to neglect or improper use", any parts
and components which are faulty or damaged due
to negligence or carelessness during use, incorrect
installation or maintenance, operations carried out
by non-authorised personnel, and damage caused
during transport or any other circumstances not due
to product manufacturing defects, such as sudden
power hikes, lightning, electrolysis and corrosion.
Furthermore, the guarantee does not cover all the
parts and components of the mixer and the boiler unit
damaged or worn due to causes deriving from and
attributable to the nature of the water or electrical or
water supply systems of the home.
The Purchaser must check that the product is not
damaged in any way before installation and must
contact the agent or authorised assistance centre
immediately if any faults are detected. The guarantee
will only be applied on presentation of a document
indicating the purchase date.
In the event of operations without proven defects or
to illustrate how to use the product, all the expenses
are sustained by the Purchaser. Any repairs or
modifi cations carried out by personnel not authorised
by the Manufacturer will not be covered by the
guarantee and will render the remaining guarantee
period immediately null and void.
The Manufacturer is not responsible in any way for
any direct or indirect damage caused to persons,
animals or things due to failure to comply with all
the regulations in the installation, instruction and
maintenance manual supplied with the product.
Any disputes will be dealt with exclusively by Mantova
Italy, Law Court.
WATER TREATMENT
• The hardness of the domestic water supply aff ects
the operation and the cleaning frequency of the
thermostatic mixer and boiler unit.
• In case of water with hardness above 15°f an antiscale
device is recommended. The choice of device should
be made according to the characteristics of the
water supply.
This symbol indicates important product
instructions or important safety information.
IMPORTANT:
Before you start to assemble and install the product,
carefully read through all the instructions. Unpack the
components and check that nothing is missing and
that there are no damaged or faulty components,
remove the transparent protective fi lm. Before
you install the shower cubicle in its fi nal position,
perform a test run. Run the unit for several minutes
and check for water leaks and any damage caused
during transport and handling. This product should
be installed by suitably skilled personnel.
N.B.: This product is designed for installation on
fi nished walls and fl oors.
Warranty claims must be produced with the purchase
invoice and the product assembling instructions.
The drawings and illustrations in this manual are
provided for information purposes only.
The manufacturer reserves the right to make changes
and improvements without prior notice.
Electrical connection:
The manufacturer certifi es that the product
conforms to current health and safety regulations
at the time of sale and that the product has the CE-
mark and Declaration of Conformity. All products
and components are tested during manufacture in
accordance with the relevant reference standards
and company quality system procedures. In order
to ensure that your manufacturer product maintains
these high standards after installation and throughout
its service life, please read the following instructions.
1. Check that the mains electrical equipment
connected to cubicle conforms to current electrical
standards and regulations and is fi tted with a fully
effi cient earth connection.
2. Current electrical regulations forbid the installation
of any electrical equipment (e.g. plugs, switches)
inside a radius of 60 cm from the cubicle and at a
height of 225 cm.
3. Check that rating of the mains power supply line
matches the absorbed power specifi ed for the cubicle
(see Technical specifi cations, page 5).
4. The electrical connection between the cubicle and
the
mains must be protected against water spray and
must have a protection rating of IP55 or higher.
5. The electrical equipment upstream from the cubicle
must be fi tted with an omnipolare 30 mA switched
circuit breaker with a minimum contact opening of 3
mm, which conforms to current electrical regulations
6. The manufacturer declines all responsibility for
injury or damage resulting from failure to observe
these instructions.
1
~
STEAM:
Once power is turned on, the display shows:
-30-

ADJUST TIME:

Time can be adjusted in stand-by only.
Hold down the
hours fl ash. Press
Press to confi rm and go on to the minutes. Press
and to adjust.
Press to confi rm. The time is set.
LOCATING AND MEMORISING THE RADIO:
1) Press to turn the radio on. Use buttons
600 mm to adjust the volume.
2400 mm
2
3
(I)
2) Press
required by moving with the
Press to memorise.
Press to go from M0 to M9 to change the stations
memorised.
Repeat these steps to locate and memorise other
channels.
SETTING THE SAUNA:
The length of the sauna must be set before starting
the sauna cycle (stand-by).
Press . The length of the sauna shows on the
display.
button for a few seconds, the
and to adjust.
(Mhz fl ashes) to locate the frequency
and buttons.
and