Geberit FLOWFIT Bedienungsanleitung Seite 4

Safety notes
CAUTION
Risk of injury caused by flying parts
▶ Do not exceed the maximum test
pressure.
▶ Ensure compliance with country-
specific regulations governing
pressure tests.
▶ Replace worn clamping rings and O-
rings.
Intended use
For monitored pressure tests of Geberit FlowFit
and Geberit PushFit piping systems using the
following test media and test pressures:
• With cold water p
• With air p
4
= 25 bar / 2500 kPa
max
= 3 bar / 300 kPa
max
45036003879526795 © 03-2024
969.977.00.0(03)