Comfee RCC141WH2 Bedienungsanleitung Seite 10

Taking a tool (flat screwdriver or cone), insert it into the gap at the arrow position in the figure
and gently pry it outward to open the flip.
After opening, the freezer is as shown in the figure. Next, take out the power line from the hole.
After removing the power line, cover the cover plate again.
After transportation, please let the freezer stand for at least 2 hours before
connecting to the power supply, otherwise it may cause performance
degradation or damage to the freezer.
Before storing fresh or frozen food in the freezer, run the freezer for 2 to
3 hours; in hot summer days, users should run the freezer for 4 hours in
advance.
During the power cut or cleaning, users should pull the plug off and plug in
again after a 5-minute interval in case the continuous start damage the
compressor.
EN-8