Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
►Change parameter value
5
► Press and
hold [Enter] key
for 2 sec
> Current setting
will flash as long
as [Enter] key is
held down.
►Press control
key[∇/∆] to
change parame-
ter setting
6
Confirm parameter value
► Press [Enter]
> the display in-
dicates the pa-
rameter. The
new value has
been saved and
will take effect.
Adjust additional parameters ► go back to Step 2
Return to configuration layer
EN
► Go to
tion layer
Exit operating parameters layer
► At the configuration layer, use control key [∇/∆] to se-
EN
lect
to end the parameters layer. Then press [Enter]
* The infrared temperature sensor will display the pa-
rameter value for 30 s. After that the display will once
again indicate the measurement as a percentage.
The instrument features a keylock. Acti-
vate/deactivate as follows:
2 s
and use [Enter] key to reach the configura-
19
25
50
50
Werbung
Kapitel
Inhaltsverzeichnis
