E-Stop - Sistematica Easy Benutzerhandbuch

It is an option (IP65) that helps ensure complete control of operations when-
ever an emergency stop of the application is required.
1. By pressing the red button, the receiver turns off resetting all outputs.
2. To reactivate the system, release the button by turning it and then
press START.
84

E-STOP

OPTIONS
The option multiplies the handheld keypad by a maximum of 4 'pages'.
OPERATION
1. Power up the receiver paired with the handheld (see PAIRING p. 77 if the
system doesn't work) and wait a few seconds.
2. PAGE SELECTION: Simultaneously press START and key 1 on the handheld
to enable the functions on the first page; START+2 for the second and
so on... up to 4 pages. We remind you that in the standard software the
EO is activated by pressing START, which automatically deactivates when
TimeOut expires or by pressing STOP.
3. COMMAND SELECTION: press the key on the handheld that activates
the function to be controlled. Example on page 1: press 1 = OUT 1+MO is
activated (if the software is standard, the MO is activated in combination
with all the function keys).
4. Press STOP when done. To restore operation, press START+1 or START+2
again (up to 4 page changes) before choosing the command to activate.
By pressing START only, the system will not manage any
outputs. It is therefore always necessary to select the page
where you want to operate.
PAGE CHANGE