Batteries - SISTEMATICA EASY Benutzerhandbuch

When the RED LED on your handheld lights up if you press a key, it means the batteries are low. System performance may be reduced and should be replaced
as soon as possible. For security reasons, any key pressed will be interpreted as a STOP command.
'STANDARD' BATTERY REPLACEMENT INSTRUCTIONS
1. Obtain 2 "AAA" 1.5V (EASY) or "AA" 1.5V (TREND) alkaline batteries.
2. Open the battery compartment on the back of the handheld by unscrewing
the two locking screws.
3. Remove used batteries.
4. Insert the new batteries, paying attention to the polarity marked inside.
5. After checking the correct functioning of the handheld, close the container
by retightening the 2 screws of the compartment.
> Please do not use rechargeable batteries in STANDARD
products
80
> The handheld contains miniaturized electronics, therefore it is
recommended to pay attention when carrying out the above
instructions, handle delicately and in a clean place.
> We recommend the use of 'professional' alkaline batteries for
better product autonomy

BATTERIES

STANDARD
EASY TREND