STOROpack PAPERplus Classic-CX Betriebsanleitung Seite 77

8.9 Paper change
Qualifications of personnel: instructed staff
Risk of foot injuries resulting from dropping or tipping of
CAUTION
paper bundles.
-
Procedure
1. Cut through the paper perforation completely before feeding.
2. Use the remaining paper to further produce paper pads until the remaining paper has
run through the machine.
3. Acknowledge the error message (start button flashes red) by pressing the button.
4. Now, you can change the paper and feed it into the machine again (see Section
Feeding paper into the machine 7.3.2
5. A new pad can now be requested (see Section
6. After each paper change, the machine must be recalibrated (see Section
Calibrating the PAPERplus®Classic-CX 8.2 ).
Wear safety footwear
).
Requesting paper pads 8.3
EN
).
77