Beko WMY 81483 LMB2 Bedienungsanleitung Seite 31

4.7 Auxiliary function selection
Select the desired auxiliary functions before starting the
programme.
Whenever a programme is selected, if a relevant auxiliary
function is selected its related indicator light will illuminate.
C
Indicator lights of the auxiliary functions that are not
allowed to be selected with the current programme
will flash and an audio warning is given.
Furthermore, you may also select or cancel auxiliary
functions that are suitable to the running programme after
the washing cycle starts. If the wash cycle has reached a
point where no auxiliary function can be selected, an audio
warning will be given and the related auxiliary function's light
will flash.
C
Some functions cannot be selected together. If a
second auxiliary function conflicting with the first one
is selected before starting the machine, the function
selected first will be canceled and the second
auxiliary function selection will remain active. For
example, if you want to select Quick Wash after you
have selected the Additional Water, Additional Water
will be canceled and Quick Wash will remain active.
An auxiliary function that is not compatible with the
programme cannot be selected. (See, "Programme
and consumption table")
Some programmes have auxiliary functions that must
be operated simultaneously. Those functions cannot
be cancelled. The frame of the auxiliary function will
not be illuminated, only inner area will be illuminated.
• Voorwas (Prewash)
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
• Express Wassen (Quick Wash)
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
• Extra Spoelen (rinse Plus)
This function enables the machine to make another rinsing
in addition to the one already made after the main wash.
Thus, the risk for sensitive skins (babies, allergic skins, etc.)
to be effected by the minimal detergent remnants on the
laundry can be reduced.
• rinse Hold
If you are not going to unload your clothes immediately after
the programme completes, you can use rinse hold function
to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water
in the machine. Press Start / Pause button after this process
if you want to drain the water without spinning your laundry.
Programme will resume and complete after draining the
water.
If you want to spin the laundry held in water, adjust the Spin
Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun
and the programme is completed.
31 / EN
4.8 End Time
With the End Time function, the startup of the programme
may be delayed up to 24 hours. After pressing End Time
button, the programme's estimated ending time is displayed.
If the End Time is adjusted, End Time indicator is illuminated.
In order for the End Time function to be activated and the
programme to be completed at the end of the specified time,
you must press Start / Pause button after adjusting the time.
If you want to cancel End Time function, press On / Off
button to turn off and on the machine.
C
Do not use
liquid detergents when you activate
End Time function! There is the risk of staining of
the clothes.
1 Open the loading door, place the laundry and put
detergent, etc.
2 Select the washing programme, temperature, spin speed
and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End Time
button. End Time indicator illuminates.
4 Press Start / Pause button. Time countdown starts. ":"
sign in the middle of the end time on the display starts
flashing.
C
Additional laundry may be loaded during the
End Time countdown period. At the end of the
countdown, End Time indicator turns off, washing
cycle starts and the time of the selected programme
appears on the display.
When the End Time selection is completed, the time
appears on the screen consists of end time plus the
duration of the selected programme.
4.9 Starting the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the
programme will turn on.
C
If no programme is started or no key is pressed
within 1-10 minute during programme selection
process, the machine will switch to OFF mode.
Display and all indicators are turned off.
Selected programme data will be displayed if you
press On / Off button.
4.10 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
the water level is unsuitable.
"Door Locked" LED in the panel turns on when the loading
door is locked.
4.11 Changing the selections after the
programme has started
After the programme has started you can make the following
changes.
4.11.1 Switching the machine to pause mode:
Press the Start/Pause button to switch the machine to pause
mode while a programme is running. The light indicating
the Start/Pause status and programme step starts flashing
on the Programme Follow-up indicator to show that the
machine has been switched to the pause mode. Also,
Loading Door light will also flash until the door is ready to
be opened. When the loading door is ready to be opened
loading door light will will turn off and programme step
Washing Machine / User's Manual