Technical specifications
Operating system:
Linux
Interfaces:
•
Sat IF inputs: x4 F-connectors, each with independent control (13/18V, 0/22KHz DiSEqC)
•
Network (Ethernet): x1 RJ45, 1GbE
•
Front ends: x4 DVB-S2
Network protocols:
Fully compliant and certified SAT>IP Server stack HTTP/HTTPS, DHCP, UDP, IGMP, UPnP, RTP, RTCP, RTSP
UPnP/DLNA-compatible server
USB:
2 x USB 2.0 host ports
Management:
Web-based configuraion; password protected login
Power supply:
•
External AC/DC adaptor, Main Input 100-240VAC ~, 50/60 Hz
•
DC Output to receiver 12V, 3A (max power consumption for all Front-end is 15W = equivalent to
800mA total LNB load).
•
Operating mode: max. 30W
Control and Display:
•
1 x On/Off switch button
•
4 x Client LED, x1 Network activity LED, x1 On/Off LED
•
1 x Reset button
Accessories:
•
Installation Manual in 2 languages
•
AC/DC power adaptor
Size:
W 190mm x D 170mm x H 40mm
Regulations:
•
CE compliance:
- 2014/30/EU (EMC Directive)
- 2014/35/EU (Low Voltage Directive)
- 2011/65/EC (RoHS Directive)
•
2009/125/EC (Eco-design Directive):
Commission Regulation (EC) No 278/2009 (power consumption of external power supplies)
49