Inverto Multibox IDL-400S Schnellstartanleitung Seite 45

A SAMBA master browser needs to be available and active on the network for proper operation. Some routers or
NAS devices provide this functionality already. In case there is no active SAMBA master browser on your network,
you can activate this function in your Multibox:
•
Select the "SAMBA" menu.
•
Check the "Activate SAMBA master browser" check box and confirm by clicking on "Save".
Please note that for proper operation it's better to activate only one SAMBA master browser on a network hence it
is recommended to deactivate this function if you already have an active SAMBA master browser on your network
otherwise it may interfere with the proper functioning of your network.
SYSTEM
Using the "System" menu, you can perform a firmware update, change the login password, perform a system
reboot or reset the system to the factory defaults.
Online Firmware Update:
If a new firmware is available it will be automatically displayed here. Clicking on the button "Update" will start the
process of installing the new firmware onto the Multibox device. At the end of the installation process, the Multibox
will restart automatically.
Note: The Multibox device must be connected to the internet in order to access new firmware updates online.
Local Firmware Update:
• Click on button "Browse" and select the file containing a new firmware (e.g. idl4k.bin) on your PC.
• Clicking on the button "Update" will start the process of installing the new firmware onto the Multibox device. At
the end of the installation process, the Multibox will restart automatically.
Change Password:
Enter the new password into both text input boxes and click on the button "Change". The Multibox shall be re-
started in order to set the new password.
System restart:
Click on button "Restart" to reboot the device.
Factory Reset:
Click on the "Factory Reset" button to reset the Multibox to the default factory configuration.
45