Herunterladen Inhalt Inhalt Diese Seite drucken

Connecting The Multibox - Inverto Multibox IDL-400S Schnellstartanleitung

Advanced sat ip multiscreen server
Vorschau ausblenden Andere Handbücher für Multibox IDL-400S:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Connecting the Multibox

Remove all protective films from the housing.
CONNECTING THE MULTIBOX TO SATELLITE SIGNALS
The Multibox can be connected to any of the following satellite reception equipment:
Single / Twin / Quad / Monobloc / Octo LNB or Universal multiswitch
Connect the outputs of the LNB/multiswitch to the inputs (1 ... 4) of the Multibox via suitable SAT antenna cables.
Note: If you intend to use less than 4 client devices, you require correspondingly less inputs (connect from input
1 and up).
Quattro LNB
Connect the 4 outputs of the Quattro LNB to the 4 inputs (1 ... 4) of the Multibox via suitable SAT antenna cables
and ensure the correct port assignment as follows.
QUATTRO LNB OUTPUT
Unicable (EN50494)
Connect the Unicable output of the Unicable LNB/multiswitch to input 1 of the Multibox (also marked with "Uni-
cable") via a suitable SAT antenna cable.
Unicable II (EN50607)
Connect the Unicable output of the Unicable II LNB/multiswitch to input 1 of the Multibox (also marked with "Uni-
cable") via a suitable SAT antenna cable.
CONNECTING THE MULTIBOX TO YOUR HOME NETWORK
Connect the LAN socket (7) of the Multibox to a LAN connector of your network router/switch/access point via a
LAN cable.
Note: A DHCP server must be active in the network (normally integrated in the router and active by default) so the
Multibox will be able to obtain IP address automatically. The Multibox shall be connected on the same network your
client devices are connected to (same IP address range).
For a smooth video streaming of satellite Live TV we recommend using a 1GbE LAN router or a 300Mbit/s WLAN
router/access point. In addition, Client devices (e.g. PCs) must have an appropriate computing (CPU) power and
graphic processor.
CONNECTING THE MULTIBOX TO POWER SUPPLY
Connect the supplier AC/DC power adapter to mains and then connect it to the power supply input (8).
34
BAND PORT
Horizontal High
Vertical High
Horizontal Low
Vertical Low
MULTIBOX INPUT PORT
1
2
3
4

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis