Inverto Multibox IDL-400S Schnellstartanleitung Seite 38

Built-in HELP text:
Although the user interface provides predictable navigation and ease of use, still, there are times when users may
need some quick guidance or clarity but do not want to sift through the user manual to find what they are looking for.
We have therefore built in help text within our web-based interface to be launched simply by clicking on the "?" on
the right side of the menu or by pressing "F1". It's available on most screens and for most features.
ANTENNA
Select the "Antenna" menu to configure your satellite input.
LNB type:
Select the type of LNB that is connected to the Satellite input of your Multibox based on your satellite installation:
•
Quad (factory default setting)
Select "Quad" if a Quad LNB, Single LNB, Twin LNB, Monoblock LNB, Octo LNB or Universal multi-
switch is connected to your Multibox.
•
Quattro
Select "Quattro" if a Quattro LNB is connected to your Multibox directly. You need to connect all the 4
satellite inputs on the Multibox according to the marking on the rear panel.
•
Unicable
Select "Unicable" if an Unicable LNB or Unicable multiswitch (according to EN50494) is connected
to your Multibox. You also need to select a user band number for each tuner and enter the respec-
tive user band frequency. Please connect the satellite cable to the rear panel input marked with the
Unicable logo.
•
Unicable II/dCSS
Select "Unicable II/dCSS" if a Unicable II/dCSS LNB or multiswitch (compliant with EN50607) is
connected to your Multibox. You also need to select a user band number for each tuner and enter the
respective user band frequency. Please connect the satellite cable to the rear panel input marked with
the Unicable logo.
Store the settings by clicking on "Save".
38