End Of Programme; Homewhiz Function - Grundig GTN 482610 GCH Bedienungsanleitung

6.15 End of program
When the program has ended, Fibre
Filter Cleaning and Water Tank
warning symbols are illuminated on
the program monitoring indicator
and "Program Ended" message is
displayed on the screen. Loading
cover can be opened and machine is
ready for another operation.
To turn off the machine, press the
On/Off/Cancel button.
Program Over
C
Wrinkle Prevention function
activates the 2-hour (varies
as per selection) Wrinkle
Prevention program if
Wrinkle Prevention is active
and laundry isn't taken out
of machine after completion
of the program.
C
Clean the fibre filter after
each drying. (See "Fibre
filter and Loading door
inner surface")
C
Empty the water tank after
each drying. (See "Emptying
the water tank")

6.16 HomeWhiz Function

You may select the program you
desire, perform auxiliary function
settings such as drying level, spin
speed selection, wrinkle prevention
period etc. and start a program by
controlling your drying machine with
smart devices with the HomeWhiz
application. You may also perform
the language, brightness and volume
settings on the settings menu of your
machine with the smart device. In
addition to these features, you may
monitor the current status of your
machine and the washing time,
remaining time and Tank full and
Cover open warnings from the
application.
Download the application
required to use the HomeWhiz
function from the application store of
your smart device.
With the HomeWhiz function, your
drying machine may send you
e-mails to make status notifications
after the application is installed if
you desire. You may activate the
email feature by entering your email
address during application setup. You
can deactivate or reactivate the email
feature any time you want from the
settings menu of your application.
With the e-mail notifications, your
Drying Machine shall send you
notification e-mails in the following
conditions.
- When the machine is turned on
- When the machine is turned off
- When the machine is operated
- When the program is paused
- When the program is ended
- When the door of the machine is
open etc. When the warnings occur
DE
EN
73